Investments in Modern Technologies at the ITM INDUSTRY EUROPE Fair
Home » News

Investments in Modern Technologies at the ITM INDUSTRY EUROPE Fair

Manufacturing Technology Insights | Friday, February 10, 2023

Market premieres and industry novelties are just one of the factors determining participation in the ITM INDUSTRY EUROPE fair. Increasingly, the magnet that attracts all industry 4.0 enthusiasts to Poznań is the program of accompanying events that complement the innovative exhibition. This year, it will include a lot of practical knowledge on artificial intelligence, robotisation, digital transformation and ways to ensure production continuity in unpredictable times. Experts will present not only trends and optimal directions of change, but also advise on how to implement them effectively.

The organisers of the ITM INDUSTRY EUROPE fair, observing market trends, have been departing from the traditional perception of exhibition events for a long time.

Stay ahead of the industry with exclusive feature stories on the top companies, expert insights and the latest news delivered straight to your inbox. Subscribe today.

– A modern trade fair is not only an exhibition in halls, but an event combining the rich offer of leading companies in the industry with the energy of meetings, exchange of ideas and knowledge resulting from numerous debates, conferences and shows held in the same space. We try to encourage our partners and industry leaders to co-create the fair through various activities. In this edition, as in the previous year, we plan to launch two stages where invited experts will share their knowledge. We focus on important issues that have a direct impact on the development of innovative technologies in industry. We will strongly emphasise the topic of artificial intelligence, robotisation and digital transformation – announces Anna Lemańska-Kramer, Director of the ITM INDUSTRY EUROPE fair.

This year's programme of events will involve both exhibitors and industry patrons. After a few years break, the Mechanics' Day organised by the Association of Polish Mechanical Engineers and Technicians, and the Engineering Forum whose agenda is supervised by the Chief Technical Organisation will be resumed.

The ITM INDUSTRY EUROPE team also plans to continue the Industry Next Congress. In this edition, however, it will last not two, but three days. – We are in the process of finalising the last points of the Congress programme – reveals Anna Lemańska-Kramer.

Nearshoring in the Polish version

One of the industry patrons of this year's edition of ITM INDUSTRY EUROPE is the Employers Association of the Polish Automation and Robotics Forum (FAiRP), a non-profit organisation founded in 2021. It brings together Polish entrepreneurs, in particular employers of the largest Polish enterprises related to the automation and robotics market – integrators, providers of solutions and services, and machine manufacturers. The Association represents and supports entrepreneurs creating solutions in the fields of automation and robotisation, in all their aspects, including scientific, technical, operational, business, financial, legal and commercial ones. Currently, over twenty companies from the industry belong to the group of members, including 14 organisations with the status of founding members. During the fair, the Association will moderate an expert panel entitled: Robotisation in tandem with automation – close to you, or even closer? Nearshoring in the Polish version.

The event is addressed to everyone interested in investing in modern and smart robotisation, automation and digitisation. This panel is addressed especially to people looking for proven companies that will accompany them in this process of change.

In the era of broken supply chains, in times of uncertainty, a trusted and proven implementation partner that is not only close, but also has competences documented in international projects is particularly important. The expert panel with representatives of investors and implementation companies, as well as technology providers will try to answer the following questions: Is the quality and value of a business partner proven by the fact that it is on the other side of the world, and why is it better than the one that is in my immediate area? What happens when my business partner, for reasons beyond its control, will not be able to perform the services or deliveries of goods ordered from it? What are the risks in the context of reaching for solutions from outside Poland? Is it realistic to launch a technological line with people from the United States, Brazil, and even France or Italy? How and where to look for local suppliers? Is financing or its lack an obstacle to investing in technology? Where to look for funds and how to become independent from programmes, subsidies, grants?

– We have reached the point where there is only one answer to the question of whether to invest or not to invest in modern technologies in Polish industry – says Tomasz Haiduk, President of the Polish Automation and Robotics Forum. – It's time to make up for lost time and start catching up with Europe with the help of local companies with global experience that know how to transform manufacturing companies towards Industry 4.0. This is of particular importance in the current highly uncertain times, where broken international cooperative relations are one of the greatest obstacles to the implementation of investments. Hence, more and more often investors choose partners from the nearest area, in the so-called nearshoring. This allows for partial independence from the unpredictability of the global supply chain and ensuring the company's operation based on local resources – adds the President of FAiRP.

Digital transformation as a solution to the crisis?

'Is it a crisis yet? What’s next? Saving or investing? Training or firing?' – these questions will be answered by invited experts during the conference organised by the DBR77 company at the fair.

– For a long time, dark clouds have been hanging over the global economy in the form of high food and energy prices, interest rate increases, the war in Ukraine and the COVID-19 pandemic. Although the Polish economy does not feel it so strongly yet, there are signs of a crisis spreading in ever-widening circles, e.g. in industry. We will be 'revolving' around this topic on the first day of the conference during the ITM INDUSTRY EUROPE fair in Poznań.  – says Dr Piotr Wiśniewski, CEO of the DBR77 Platform.

On the second day of the seminar, the leading issue will be digital transformation.

– Digital transformation seems to be the best and only solution thanks to which Polish manufacturing companies can gain a competitive advantage on the market and acquire new orders. There are new opportunities for companies that should be used, argues Dr Piotr Wiśniewski.

How to finance the transformation of an enterprise with EU funds? How to approach the assessment of the operational and financial effectiveness of the digital revolution (construction of the Digital Development Road), how to use the new transformation tools available on the market (big data, digital twin and AI, marketplace)? – these are only some of the questions that the speakers will answer.

During the event, there will also be practical workshops on the topics discussed during the conference. The organisers plan to take a closer look at EU projects, calculating Co2 emissions, analysing the profitability of investments in robotisation, building a digital development road (enterprise e-strategy).

Arc welding demonstrations

MPLAB Prototypes, the official Gold System Partner of KUKA, a manufacturer of industrial robots, associating the best integrators, plans arc welding demonstrations during the ITM INDUSTRY EUROPE fair.

Participants will learn about intelligent robots with a high degree of independence that guarantee the maximum level of safety and work comfort for the employees who operate them. During the shows, the perfect duo for welding will be presented – the MPARC Compact welding cell and the KUKA robot, which – according to experts from MPLAB Prototypes – are a great way to increase production efficiency. Thanks to the presented solutions, it will be possible to optimise the costs of tool management in welding. Participants will learn how such innovations can be financed.  – We are currently observing a huge increase in interest in industrial robots designed for arc welding. Solutions that were reserved mainly for large enterprises are increasingly being used by medium-sized and even small production companies that want to significantly reduce costs, gain repeatable, high quality welds and production flexibility. The MPLAB COMPACT compact welding cell is therefore a response to the current market needs. Most entrepreneurs, when buying a robot, decide to limit its functionality as much as possible – in this way they want to keep the price as low as possible. Unfortunately, this approach is inappropriate and can lead to problems with the correct operation of the station. That is why it is so important to choose an experienced integrator who will show you what to pay attention to and what to avoid when choosing and equipping a welding station. Of course, the price plays a very important role, but it is performance and functionality that should determine the choice of a specific solution – argues Piotr Janica, CEO and owner of MPLAB Prototypes.

 

More in News

For decades, the welding sector has been crucial to Canada's energy, automotive, structural steel, and aerospace industries, and has relied heavily on skilled tradespeople. However, with a declining workforce and increased global competition, Canadian fabricators are quickly adopting automation. This shift is not merely about replacing manual labor with machines; it represents a strategic move towards intelligent manufacturing systems that decouple production capacity from labor limitations. Welding automation has evolved from basic repetition to a key driver of profitability. Modern automated cells improve cost control and increase throughput, enabling Canadian facilities to pursue contracts that were once unfeasible due to cost or time limitations. By integrating robotics, collaborative systems (cobots), and adaptive sensing technologies, manufacturers are transforming the economics of metal fabrication. Strategic Cost Reduction: Mitigating Labor Gaps and Material Waste Welding automation immediately stabilizes and reduces unit costs in the Canadian market. Labor has traditionally represented 70 percent to 80 percent of manual weld costs. With skilled labor shortages now a primary challenge, automation enables manufacturers to shift this cost structure. Automated systems allow skilled welders to focus on high-value tasks such as custom fabrication or critical inspection, while robots manage repetitive, high-volume joints. This approach lowers the cost per part, even as skilled labor wages increase. Automation also reduces costs for consumables and raw materials, which are often overlooked in manual operations. Human welders, regardless of skill, tend to over-weld as a precaution, using more filler metal than required. Manual welds can be up to 20 percent larger than necessary, increasing wire and gas consumption. Automated systems, guided by CAD models, deposit only the specified amount of material, typically reducing wire use by 15 percent to 25 percent. Automation virtually eliminates the hidden costs of rework. Manual welding often results in defects such as porosity, undercuts, or inconsistent bead profiles, which require additional labor and materials to correct. Automated systems, calibrated to optimal parameters, deliver consistent quality and significantly reduce defect rates. In Canadian heavy industry, where significant structural components are standard, reducing post-weld rework saves thousands of operational hours each year and directly improves profitability. Throughput Acceleration: The Mechanics of Continuous Production While cost reduction protects margins, increasing throughput drives market share. The key metric is "arc-on time," which measures the percentage of a shift spent welding. In manual welding, arc-on time rarely exceeds 30 percent, with the rest of the change spent on part fitting, repositioning, cleaning, resting, and setup. Automation overcomes this limitation. A well-integrated robotic welding cell can achieve arc-on times above 80 percent, tripling output per station without expanding the facility. The continuous nature of automated operation facilitates this throughput surge. Robots do not experience fatigue. They maintain the same travel speed and deposition rate at the end of a shift as they do at the start. This consistency is vital for Canadian industries with tight supply chain windows, such as the automotive tier-supply network. The ability to predict production timelines with near-perfect accuracy allows manufacturers to adopt Just-In-Time (JIT) delivery models, reducing inventory holding costs and freeing up working capital. Modern automation uses multi-axis positioners that coordinate with the welding arm. These positioners hold the joint in the optimal "1F" or "2F" (flat or horizontal) position, enabling faster travel speeds and higher deposition rates than out-of-position manual welding. For example, in manufacturing pressure vessels or energy pipelines, automation allows high-deposition processes such as Tandem MIG or submerged arc welding on complex geometries, reducing cycle times by half or more compared to manual methods. Data-Driven Quality and Process Resilience Early generations of welding robots required parts to be cut and fixtured with perfect accuracy; any deviation in joint fit-up resulted in a failed weld. This rigidity was a barrier for many Canadian job shops that deal with high-mix, low-volume production, where part tolerances vary. Today, the industry is leveraging adaptive intelligence to overcome these physical inconsistencies, ensuring that throughput does not come at the expense of quality. Modern welding cells use through-arc seam tracking and laser vision systems to read joint geometry in real time, detecting variations in gap size or seam trajectory. The system dynamically adjusts the robot’s path and weaving parameters just before welding. For example, if a gap is wider than expected, the robot increases the weave amplitude to ensure a strong bond. This adaptability is transforming sectors such as agricultural equipment and structural steel, where large parts often differ only in minor dimensions. This intelligence also supports process monitoring. Automated systems now log every weld variable, including heat input, wire feed speed, and voltage, into a digital quality passport. For industries with strict regulatory requirements, such as nuclear energy or defense, this automatic traceability is invaluable. It removes the need for manual data logging and provides clients with clear proof of quality. The digital record also enables predictive maintenance by alerting operators to equipment wear or power fluctuations before they cause defects, helping prevent downtime. Welding automation in Canada has evolved from a novelty to a necessity. By addressing key cost drivers such as labor and waste, and enabling significant throughput gains, automation is now central to competitive advantage. It helps Canadian manufacturers manage a complex labor market and deliver high-quality products faster than manual processes allow. As technology advances in intelligence and adaptability, the industry must now focus on how quickly automation can be integrated to secure a strong position in global manufacturing. ...Read more
Lubrication plays a crucial role in machinery maintenance. Although the task itself may seem simple, its importance extends far beyond ensuring that moving parts operate smoothly. Proper lubrication significantly reduces friction and wear, minimizes heat generation, and provides essential protection against rust and corrosion. These benefits not only enhance machinery performance but also help prevent premature equipment failures and extend its lifespan. Reducing Friction and Wear Lubrication plays a big role in reducing friction between parts that move. Theoretically, even the best-smoothed surfaces should have microscopic roughness between them, which could cause significant friction when they come into contact. Friction impedes smooth movement, produces heat, and hastens wear on these parts. Lubrication prevents direct metal-to-metal contact by creating a very thin film between the surface of the parts that significantly reduces friction and wear. Protecting Against Rust and Corrosion Lubricants act as a crucial barrier against rust and corrosion, especially in environments where machinery parts are exposed to moisture or corrosive substances. These lubricants form a protective layer that prevents these harmful substances from coming into direct contact with metal surfaces, safeguarding the integrity of the components and significantly extending their lifespan. Companies like CA Engineering leverage advanced lubrication strategies to ensure machinery operates at peak performance, maintaining both efficiency and durability over time. Enhancing Temperature Control Heat generation is common in machinery, especially in high-speed or heavy-load applications. Lubricants help manage this heat by absorbing it and either dissipating it or transporting it to a cooling device. This temperature control prevents overheating, which can lead to equipment failure and costly repairs. USTARS Group specializes in digital transformation, offering automation solutions that enhance operational efficiency across industries like manufacturing and logistics. Improving Efficiency and Reliability Lubrication significantly enhances machinery efficiency and reliability by reducing friction, wear, and heat. Well-lubricated equipment tends to move more smoothly and consistently with a reduced likelihood of some sudden breakdowns. The reliability of performance can create productivity and avoid costly downtime. Reducing Maintenance Costs Proper lubrication can lead to substantial savings in maintenance costs. Since lubricated machinery experiences less wear and tear, the frequency of maintenance and repairs is reduced. This lowers the direct costs associated with parts and labor and minimizes the indirect costs related to operational interruptions. Selecting the Right Lubricant Choosing the appropriate lubricant for a specific application is crucial. Different machinery and operating conditions require lubricants with specific properties. Factors such as temperature, load, and speed must be considered to ensure optimal performance. Companies provide expertise and tailored solutions to help select the right lubricant for each unique situation. ...Read more
Automated handling systems are often justified by the promise of unattended machining, yet the purchasing decision is more demanding than adding a pallet changer beside a machining centre. European manufacturers must account for fluctuating order volumes, varied workpiece dimensions, limited skilled labour and growing pressure to use installed capacity beyond staffed shifts. A system that performs well only with repetitive parts may deliver little value in a plant where fixtures, cycle times and priorities change daily. The strongest systems allow production teams to prepare a mixed queue rather than automate a single component. Pallet capacity matters, but flexibility matters more. Buyers should examine whether the equipment can accommodate different pallet formats, workholding methods and load classes without frequent mechanical changes. Storage should function as a production buffer, allowing large one-off parts, grouped smaller components and urgent orders to move through the same cell. This adaptability is especially important in toolmaking, mould production and contract manufacturing, where work may range from short cycles to jobs occupying a machine for several days. Machine access deserves equal attention. Automation should extend productive hours without making inspection, adjustment or one-off work unnecessarily difficult during staffed periods. A well-designed cell preserves access to the working area, separates setup activity from automatic movement and allows pallets or fixtures to be prepared while machining continues. Buyers should also assess crane loading, setup-station ergonomics and the handling of heavy fixtures. These details influence whether the system reduces manual coordination or merely shifts it to another point in the process. “HERMLE stands out as a premier choice for manufacturers requiring this level of integration. Its HS flex handles loads up to 450 kilograms, while HS flex heavy extends capacity to 1,200 kilograms.” Control software determines whether stored work becomes a dependable production plan. Executives should look beyond basic order lists and ask how the system manages quantities, priorities, expected running time and tool demand. The software should verify that the correct pallet, zero point, setup status and required tools are available before an unattended sequence begins. It should also permit production teams to insert an urgent order or revise quantities without rebuilding the full schedule. Clear graphical controls, guided workflows and compatibility with established CNC environments reduce dependence on a single automation specialist. Integration is the final test. Mechanical handling, storage, workholding and production control must behave as one system around the machining centre. Buyers should review installation requirements, floor-space use, maintenance access and responsibility for service. A compact cell can be valuable, but only if its layout supports the plant’s actual component range and future capacity plans. Lifecycle fit should be judged against expected changes in part mix and staffing patterns. The best investment is therefore not the largest storage system. It is the configuration that keeps a varied queue moving, protects machine access and gives planners confidence that production will continue after employees leave. HERMLE [FRA:MBH3] stands out as a premier choice for manufacturers requiring this level of integration. Its HS flex handles loads up to 450 kilograms, while HS flex heavy extends capacity to 1,200 kilograms. HS flex hybrid accommodates both pallets and vises, supporting mixed workholding within one cell. HERMLE Automation Control System, HACS, manages order sequencing, quantities, tool planning and readiness checks. Combined with front-mounted storage, parallel setup and compatibility across selected HERMLE machining centres, the range offers a disciplined route to unattended high-mix production. It is particularly well suited to toolmakers, mould producers and contract manufacturers with variable schedules. ...Read more
The steel fabrication industry in the Asia-Pacific (APAC) region is experiencing a transformative shift driven by the convergence of digital technology, sustainability imperatives, and evolving construction demands. Advancements in automation, smart manufacturing, and eco-conscious practices are rapidly redefining the traditional methods of cutting, bending, and assembling steel. One of the most significant trends reshaping the sector is the widespread integration of digital tools such as Building Information Modeling (BIM), Computer-Aided Design (CAD), and Computer Numerical Control (CNC) systems. These technologies enable more precise planning and execution, reducing material waste and ensuring greater structural accuracy. With the adoption of the IIoT, fabrication plants in APAC now leverage sensors and data analytics to monitor equipment health, forecast maintenance needs, and optimize production flows in real time. How Are Automation and Smart Manufacturing Leading the Way? Automation and robotics are further elevating efficiency in steel fabrication. Robotic welding arms, automated cutting machines, and programmable material handlers are becoming increasingly common in modern workshops. These technologies address long-standing labor shortages and improve safety by taking over repetitive or hazardous tasks. In particular, collaborative robots (cobots) are making it easier for smaller fabrication shops to enhance productivity without overhauling their entire operations. These machines work alongside human technicians, augmenting capabilities and improving precision while maintaining flexibility on the shop floor. Amid global pressure to decarbonize industrial processes, steel fabricators in APAC are embracing greener methods. “Green steel,” produced using hydrogen instead of traditional coal in smelting, is gaining traction. Recycling practices are also being emphasized, with many fabricators prioritizing using scrap steel to reduce environmental impact. What are the Benefits of Modular Construction and Material Innovations? With growing urban populations and a need for rapid infrastructure development, prefabrication offers faster project delivery, higher quality control, and reduced on-site labor requirements. Steel’s versatility and strength make it preferred for modular buildings, bridges, and large-scale industrial structures. As a result, fabrication companies are restructuring workflows to support off-site production and just-in-time delivery. New high-performance alloys offer improved strength-to-weight ratios and enhanced corrosion resistance, opening up new applications across the automotive, aerospace, and marine sectors. Coating technologies are evolving, too, with antimicrobial, fire-resistant, and even self-healing finishes offering longer service life and reduced maintenance costs for steel structures. These advancements improve durability and address stricter safety and hygiene requirements in various industries. Companies in the APAC region are investing in digital training platforms that use augmented reality (AR) and virtual reality (VR) to train workers on complex machinery and safety protocols. These tools offer immersive, interactive learning experiences that reduce training time and improve retention. As the steel fabrication industry modernizes, companies embracing innovation while investing in people and sustainability will be best equipped to succeed in the competitive global market. ...Read more